The Wipeout is equipped with innovative dual rollers. These are highly absorbant to ensure excellent chemical retention on the surface and for excellent application to weeds. The first of these counter rotating twin rollers lifts the weed up to apply the chemical to the sensitive underside of the leaf which allows for a much faster herbicide absorption and so faster weed kill rates. The second roller rotates in the opposite direction and acts to separate out any clumps of weeds to get a more even chemical application for better weed kill results. The second roller also acts as a reservoir to absorb any excess chemical that may be on the primary roller, to minimise the risk of dripping which can cause grass to burn.

Through considerable development time and investment we have discovered a process of unique atomisation technology where chemical is applied in the form of micro-bubbles which attach themselves to the rollers without bursting.  Chemical activation is enhanced since the chemical is transferred to the weeds in a bubble form.  Upon contact with the weeds the micro bubbles burst and provide a better stem coverage than the standard chemical film approach.  

The Wipeout boasts an integrated intelligence system diagnostics.  This inbuilt diagnostics panel offers a simple zone fault identification to ensure easy use and maintenance.

The Wipeout has a 7 position adjustable height from 140mm - 380mm (approx depending on towing vehicle used) to suit different grass and weed height.  This ATV weed wiper is ideal for the UK climate and ground conditions and comes with low pressure knobby tyres as standard to allow you to access wet areas. 

Weed wiping is a more environmentally friendly approach to weed control in comparison to boom spraying, since only the weeds are targeted. This ensures that grass and clover growth is not stunted. With none of the off spray associated with boom spraying, wildlife habitats are less affected and it's healthier for you too. 

Product Options
The Wipeout can be purchased with or without a tank. If you choose to purchase the wiper with a tank we will supply a 100l UV protected tank. If you already have a sprayer tank with a high capacity pump, you should be able to use it to run this weed wiper. However you will require an optional Wipeout wiring kit to allow you to activate the chemical application. You may also require some hose. A tank mount is incorporated in the frame of the Wipeout and so a sprayer tank can be mounted on the Wipeout. If you choose the Wipeout complete with tank, a handlance kit is available which can be used to connect to the tank for spot spraying when you are not using the tank with your Wipeout. This will increase the use of your equipment and maximise your investment. If you are using an existing tank we recommend that you purchase the optional dump valve. The dump valve is required to regulate the pressure if wiping in dense weeds. If you have purchased a Wipeout complete with tank, this dump valve is fitted as standard and does not have to be purchased separately.

We also manufacture a range of other weed lickers, from the more basic Weed Destroyer to the manually operated twin roller Xterminator.  Please have a look at the Weed Destroyer and Xterminator models for more information. 




This system in unison with a massive contact width makes it quicker and easier than spot spraying. Suited best to weeds taller than pasture.  Ideal for rush control.